Installera Android på HTC TyTN II

Från Swedroid Wiki
Hoppa till: navigering, sök

Installing Android on the HTC TyTN II

Wait! Are you on the right page for your device? The HTC TyTN II is also known as the AT&T Tilt, HTC Kaiser, and T-Mobile MDA Vario III. If you have any of these devices, you're in the right place.

This page serves as a guide to help you install Google Android on your AT&T Tilt or other branded version of the HTC TyTN II.

Installing Android

Currently, Android is booted from within Windows Mobile. It does not run INSIDE Windows Mobile nor is it emulated! An application named HaRET is used as a bootloader to REBOOT the device into Android. Currently, it is possible to store the Android files within the normal FAT32 partition of the SD card. For more advanced users, it is also possible to use a separate ext2 partition on the SD card.

The instructions are the same for all supported devices.

Android 1.5

Using one FAT32 Partition on SD Card

Currently, the newest files can be found on the Latest Builds page.

To run Android:

Place the following files on the root of your Storage Card (not in a subfolder):

HaRET (haret.exe)

The latest Android kernel (zImage)

The latest initrd (initrd.gz)

A boot script (default.txt)

The Android OS files (system.img)

data.img is created automatically - there is no need for a data.gz file!

Edit default.txt as appropriate for your device

For more information, see the Boot Options page.

OPTIONAL: Configure data access to use e-mail, Internet, Market, etc.

Run HaRET and tap “Run”


Använd http://code.google.com/p/vogue-android/ för att hitta nya builds, alt http://www.androidonhtc.com/kaiser:latest_builds Det finns även färdiga paket som bara behöver läggas i sd root.

Glöm ej heller att ändra default.txt efter dina behov. För att gå igång data måste du ställa in APN, tryck på menu knappen när du är inne och ska logga in på en Google tjänst (ex market)

Du kan ev måsta ändra "# board-htckaiser.panel_type" om den beter sig konstigt med ränder på skärmen när du startar den. Börja med 0 och arbeta dig fram till 3.

Så här ser min nuvarande ut (Telia)

set RAMSIZE 0x07000000 set RAMADDR 0x10000000 set FBDURINGBOOT 0 set MTYPE 1553 set KERNEL zImage set initrd initrd.gz set cmdline "board-htckaiser.panel_type=1 ppp.apn=online.telia.se ppp.username=none ppp.password=none pm.sleep_mode=1 mddi.width=320 mddi.height=428 no_console_suspend board-kaiser-keypad.atttilt=0" boot